Wh Outsource Services Sdn Bhd

WORLDBULK LOGISTICS AGENCIES 
Suite 11.03, Level 11, Menara Trend,
Intan Millennium Square,
No. 68, Jln batai Laut 4,
Taman Intan,
41300 Klang,
Selangor, Malaysia.

LINER SPECIFICATION
For (application): 20ft PE Film Liner for Flexitank

3       Application Details :

         3.1   Product To Be Carried: Most Non-Hazardous Free Flowing Liquid Products Subject To MSDS Submission And Approval

         3.2   Bulk Density: According To The Product MSDS

4       Liner Material And Construction :

          4.1   Liner Body Film (Refer To Film Specification Data Sheet Below)
           -      Fabricated From FDA Approved Food Grade Three Layer Co-Extruded Tubular Film Made From A Unmodified
                  Blend Of Resins Based On Polyethylene
           -      Resin Used Comply With Current FDA Regulation CFR-21 section 177.1520
           -      End Closed By Impact Welded Seals

          4.2   Filing And Discharge Flanges (1 In Total)
           -      One Filing Flange - 3" Diameter
           -      Attached To Main Body By A 360 Degree Impact Welded Seal
           -      Fabricated From Food Grade PE Supplied With Caps / Plugs

          4.3   End Welding
          -       Each End Of The Liner Will Be Welded Using 2 X 12mm Impulse Welds
          -       Each End Of Liner To Be Tested Using Air Pressure at a minimum Of 2 Bars
          -       Each End Of The Liner Will Be Re-Sealed After Testing With 2 X 12mm (Min) Impulse Welds

5       Packaging :
        

          Each Liner Is Packed In Individual Boxes Size, 1600mm (L) X 600mm (W) X 390mm (H)
          -         10 Units Per Pellet Strapped And Shrink-Wrapped
          -          Packaging Suitable For Handling Via a Forklift
          -          All Boxes Labeled According To Customer Requirements
          *          Liner Product Code (Customers/Suppliers)                        * Customer Order Number
          *          Liner Batch Number Range                                                     * Pallet Number Of Total Pallets

6        Film Specification

          Film To Be Manufactured From Food Approved Polymers Using Monomers Listed As Approved Starting
          Substances In SI 3i45, And Additives Listed As Approves In EU Directive 93/3/EC

          Product                                      :      Liquid Liner Film

          Nominal Dimensions

          
          Thickness                                   :      124 Microns
          Widths                                         :       Open Width                        4000 mm
                                                                        Layflat Width                      2400 mm 

          Dimensional Tolerances   

          Mean Thickness                         :      +/- 5% Of Nominal
          Point Of Thickness                     :      +/- 5% Of Nominal
          Width                                             :       +/- 2% Of Nominal

          Mechanical Properties    

          Typical Values                             :        Tensile Strength                   25 MPa                     MD
                                                                                                                           25 MPa                      TD 
                                                                           Yield Strength                         8 MPa                      MD / TD
                                                                           Tear Strength                        110N                         MD
                                                                                                                             90N                          TD 
                                                                           Elongation To Break*          (ASTM D882)           745%                      MD
                                                                                                                            (ASTM D882)           750%                      TD

           Impact Strength
           (Drop Dart Test)(ASTM D1709)

           Minimum F50 Values                          > 1260g

           Surface Properties

            Coeffcient Of Friction <0.25 (Outer Face: Outer Face)
             Inner Surfaces Must Not Be Blocked
            The Film Must Be Free Of Creases

7          Rider 

             The Data Represented Above Are Nominal Values From The Product Type Described Based On Random Tests
             Performed At The Time Of Manufacturing. Worldbulk Logistics Agencies Is Continually Improving Its Product
             And As Such, The Specification Given Above May Alter At Any Given Time Without Notice.
             This Specification Is Correct At Date Of Issue.